16 CFR 1611 乙烯基塑料薄膜可燃性检测

发布日期:2021-05-22 14:01:29  浏览量:297
16 CFR 1611 Standard for the flammability of vinyl plastic film
乙烯基塑料薄膜可燃性测试
Test Clause
测试条款
Requirement
要求
Price (RMB)
Price
价格
1200
Conditioning
条件作用 
Condition the specimens for a period of 48 h in a circulating-air oven at a temperature of 50 ± 2°C [122 ± 3.6°F]. Remove the specimens from the oven and cool to the room temperature in a desiccator over anhydrous calcium chloride for a period of at least 5 h for specimens 7 mm [0.25 in.] or under in thickness, and at least 15 h for specimens over 7 mm in thickness, immediately prior to testing.
将样品在循环空气烘箱中于50±2°C [122±3.6°F]的温度下处理48小时。 将样品从烤箱中取出并在干燥器中用无水氯化钙冷却至室温至少5小时,以检查7毫米[0.25英寸]或厚度以下的样品,对于15分钟以上的7毫米以上的样品 即将进行测试之前,其厚度为mm
Sample Required:
所需样品:
1mX1m (6×9in 5pieces/ direction)
1mX1m6×9in 5/方向)
Turnaround time: normal (6 working days), express (4 working days).
所需时间: 标准(6个工作天), 加快(4 个工作天).